Skip to content
Markets

LED lighting for residential developments

Downlights, strip and profile for developers and installers on multi-unit and high-end residential schemes.

We supply residential lighting to the people who build it: developers, main contractors, electrical installers and interior designers working on apartment blocks, villas, serviced apartments and estate-wide schemes. The scale is a project, not a single room, so the specification has to repeat across every unit and every phase and still be right in the show flat. The catalogue holds 1,858 LED downlights and 1,814 LED strips and profiles, including 1,172 Neon-Flex and 43 COB strip, with floodlights and streetlights for the grounds and approaches. Fittings are built around LEDs from Philips Lumileds and Nichia with Mean Well drivers. Send us the unit plans and the CCT you are working to, and we specify against them.

What we supply to residential projects

Living areas, kitchens, bathrooms and corridors come from the downlight range, 1,858 products, with CCT and CRI published per product so one colour temperature holds across the whole development. Coves, kitchen plinths, wardrobes, stairs and headboards come from LED strips and profiles, 1,814 products, with aluminium profile specified alongside the strip so the extrusion, the diffuser and the strip are handled as one item.

Common parts, car parks, landscaping and approaches come from the floodlight range, 1,686 products, and the streetlight range. Bathrooms, balconies and wet areas are specified from the IP65 to IP68 housings in the catalogue.

Specifications are published per product across the catalogue — power, lumens, efficacy in lm/W, IP rating, beam angle, CCT, IK rating, voltage and warranty, where these are published for the line — so the design team can check a fitting against the specification before enquiring.

What a residential development asks of the fitting

Six things shape how we specify lighting across a residential scheme.

01
The same fitting in every unit
A development is one specification multiplied by the number of units. Output, CCT and CRI published per product mean the last block matches the first, and a later phase matches the show flat.
02
One CCT from the lobby to the bedroom
CCT is published per product, so common parts, corridors and apartments can be held to one figure on paper before anything is ordered.
03
Dimming that suits the home control system
Dimming behaviour is set by the gear, not the fitting. Tell us the control system the units are wired for and we confirm what the driver does before you commit.
04
Detail that installs in one visit
Strip and profile are supplied together and specified against the joinery drawing, so the installer fits one item rather than reconciling three on site.
05
Wet areas rated per position
Bathrooms, balconies and terraces take an IP65 to IP68 housing selected for the position, rather than one rating applied across the unit.
06
Long intervals between changes
Rated life is 50,000 to 100,000 hours, depending on product, so a cove in a double-height lobby or a stair run is not a maintenance item.

Where these fittings go

Apartments and serviced units
Downlights held to one CCT across every unit, with the dimming method confirmed against the control system.
Villas and high-end residences
Coves, joinery, headboards and stairs from strip and profile, specified against the detail drawing.
Kitchens and bathrooms
COB strip for a dot-free plinth or shelf line, and IP65 to IP68 fittings for the wet positions.
Lobbies and common parts
Continuous coves and downlights at height, where rated life decides how often access equipment comes in.
Car parks and grounds
Floodlights and streetlights for the exterior, 1,686 floodlight products, with housings selected for the position.
Facades and balconies
Neon-Flex for linear exterior detail, 1,172 products, rated for the weather it faces.

Specification summary

Downlight range
1,858 products, CCT and CRI published per product
Strip and profile range
1,814 products, including 1,172 Neon-Flex and 43 COB strip
Exterior
1,686 floodlight products and the streetlight range for grounds and approaches
Ingress protection
IP20 for interiors to IP68 for wet and exterior positions
Rated life
50,000 to 100,000 hours, depending on product
Energy against the lighting replaced
Up to 70% less energy than the traditional lighting replaced
Drivers and controls
Mean Well drivers; confirm dimming method and driver dimensions with us
Key components
Philips Lumileds and Nichia LEDs, Mean Well drivers
Published product data
Power, lumens, efficacy, IP rating, beam angle, CCT, IK rating, voltage and warranty, where these are published for the line

Custom profiles, custom lengths and OEM work

JNLED was founded in 2010 and is headquartered in Hong Kong, close to the factories in South China we work with, which allows close collaboration on product development. We hold our own moulds on key product lines and buy direct from the chip, driver and coating suppliers.

That is what makes customisation practical on a project order rather than a catalogue-only exercise. We take on OEM projects and a high level of customisation. If the job needs a wattage, an optic, a mounting or a build the catalogue does not already list, send us the requirement and we will tell you what we can do against it.

Simulation, costing and delivery support

Before you commit, we produce light-simulation reports for the space in question and cost-saving calculations against the existing installation. That gives the specifier something to present and the operator a figure to judge it by.

After the order, we cover project design, production, logistics including customs clearance and warehousing, and installation support, and we ship worldwide. Warranty is published per product, where it is stated for the line.

Send us the development

Give us the unit plans, the number of units and the CCT you are working to, and we come back with a specification per unit type, a simulation and a price. A lighting schedule speeds this up, but it is not required to start.