Skip to content
Markets

LED lighting for hotels, restaurants, bars and venues

Strip, Neon-Flex and profile for hotels, restaurants, bars and venues, from the cove to the facade.

In a hotel lobby, a restaurant or a bar, nobody is meant to look at the fitting. They look at the line of light, the wash on the wall, the edge of the cove, the glow under the counter. We supply LED strip, Neon-Flex, COB strip and aluminium profile for that kind of detailing, with drivers to run it, and the same formats for event venues and exhibition builds that go up, come down and go up again. LED strips and profiles is our largest category at 1,814 products, including 1,172 Neon-Flex, 43 COB strip and 23 RGBW strip. Ingress protection runs from IP65 to IP68, rated life runs from 50,000 to 100,000 hours, and the fittings are built around LEDs from Philips Lumileds and Nichia with Mean Well drivers. Send us the detail drawing, the run lengths and the CCT you are working to, and we specify against it.

What we supply for hospitality, F&B and venues

Linear detailing comes from LED strips and profiles, 1,814 products in total. Within that category, Neon-Flex runs to 1,172 products for continuous linear detail inside and out, COB strip to 43 products for a dot-free line under a counter or along a shelf, and RGBW strip to 23 products where the brief calls for colour and a usable white from the same run. Aluminium profile is specified alongside the strip so the extrusion, the diffuser and the strip are handled as one item against your section drawing.

Gear comes from drivers and controls, built around Mean Well drivers. Guest rooms, corridors and dining rooms come from the downlight range, 1,858 products, with CCT and CRI published per product. For facade wash and exterior accent the catalogue holds 1,686 LED flood lights, including 156 modular floodlights.

Event venues and exhibition builds use the same formats under harder conditions: the fitting is rigged, struck and rigged again, and has to look identical at the next show. Strip, profile and drivers are specified for that cycle, with the driver placed where the structure can hide it.

Specifications are published per product across the catalogue — power, lumens, efficacy in lm/W, IP rating, beam angle, CCT, IK rating, voltage and warranty, where these are published for the line — so the design team can check a fitting against the specification before enquiring.

What a hospitality scheme asks of the fitting

Seven things shape how we specify lighting for a hotel, a restaurant, a bar or a venue.

01
The fitting disappears into the detail
A cove, a reveal, a shelf or a slot works when the source is hidden and only the light shows. We supply strip and profile together, so the extrusion, the diffuser and the strip suit the section rather than being reconciled on site.
02
One CCT across the whole scheme
CCT is published per product, so a lobby, a corridor, a guest room and a dining room can be held to the same figure on paper before anything is ordered.
03
Dimming that suits the control system
A restaurant at lunch and the same room at ten in the evening are two lighting states. Dimming behaviour is set by the gear, so tell us the control system and the method and we confirm what the driver does.
04
Continuous runs, not a row of points
Where a cove, a bar front, a handrail or a facade line has to read as one line of light, the format matters more than the output. Neon-Flex and COB strip are the two formats we carry for that detailing.
05
Gear that fits the void you have
Remote gear has to fit the ceiling void, the joinery, the bar plinth or the stand structure, and stay accessible. Tell us the void depth and the access arrangement and we confirm driver dimensions.
06
The same colour on every stand and every site
For venue and exhibition work the fitting travels. CCT and output published per product mean the next hall and the next branch match the last one.
07
Long intervals between changes
Rated life is 50,000 to 100,000 hours, depending on product. In an atrium cove or a facade run, every replacement means access equipment and an area taken out of use.

Where these fittings go

Lobbies and atria
Cove, slot and reveal lighting at height, plus reception and feature detailing, where a lamp change means access equipment.
Guest rooms and corridors
Headboard, mirror, wardrobe and skirting detail, continuous corridor coves and downlights held to one CCT.
Restaurants and bars
Under-bar, shelf, back-bar and joinery lighting, coves over seating, and a dimming method confirmed against the control system.
Event venues and stages
Strip and profile rigged and struck across a season, with drivers placed where the structure hides them.
Exhibition stands and trade shows
The same fitting rebuilt on a different elevation and matching the last show, CCT and output published per product.
Facades and exteriors
Neon-Flex for linear facade detail, 1,172 products, and 1,686 LED flood lights for wash and accent from a distance.

Specification summary

Strip and profile range
1,814 products, including 1,172 Neon-Flex, 43 COB strip and 23 RGBW strip
Downlights
1,858 products, CCT and CRI published per product
Facade and exterior lighting
1,686 LED flood lights, including 156 modular floodlights
Ingress protection
IP65 to IP68 across the catalogue, selected per mounting position
Rated life
50,000 to 100,000 hours, depending on product
Efficacy
Up to around 100 lm/W on strip and profile, quoted per product
Energy against the lighting replaced
Up to 70% less energy than the traditional lighting replaced
Drivers and controls
Mean Well drivers; confirm dimming method and driver dimensions with us
Key components
Philips Lumileds and Nichia LEDs, Mean Well drivers
Published product data
Power, lumens, efficacy, IP rating, beam angle, CCT, IK rating, voltage and warranty, where these are published for the line

Custom profiles, custom lengths and OEM work

JNLED was founded in 2010 and is headquartered in Hong Kong, close to the factories in South China we work with, which allows close collaboration on product development. We hold our own moulds on key product lines and buy direct from the chip, driver and coating suppliers.

That is what makes customisation practical on a project order rather than a catalogue-only exercise. We take on OEM projects and a high level of customisation. If the job needs a wattage, an optic, a mounting or a build the catalogue does not already list, send us the requirement and we will tell you what we can do against it.

Simulation, costing and delivery support

Before you commit, we produce light-simulation reports for the space in question and cost-saving calculations against the existing installation. That gives the specifier something to present and the operator a figure to judge it by.

After the order, we cover project design, production, logistics including customs clearance and warehousing, and installation support, and we ship worldwide. Warranty is published per product, where it is stated for the line.

Send us the scheme

Give us the space, the detail drawing and the CCT and lux you are working to, and we come back with a specification, a simulation and a price. Reflected ceiling plans, a lighting schedule or a stand drawing speed this up, but they are not required to start.