Industrial lighting is judged on what it costs to run and how often somebody has to go up to it. We supply high bay lighting, floodlights, high mast lighting and ATEX explosion-proof fittings for factories, warehouses, logistics yards, ports and process plants. The catalogue holds 759 LED high bay lights, 1,686 LED flood lights including 156 modular floodlights, 240 high mast lights and 101 ATEX explosion-proof fittings. Housings are specified from IP65 to IP68, rated life runs from 50,000 to 100,000 hours, and the fittings are built around LEDs from Philips Lumileds and Nichia with Mean Well drivers. Send us the mounting height, the area and the lux target and we specify against it.
What we supply to industrial sites
Interior halls come from the high bay range, 759 products, selected by mounting height and the lux the task needs at floor level. Yards, loading bays and perimeters come from the floodlight range, 1,686 products including 156 modular floodlights that scale from a single module to a full mast head. Where the mast is tall and the area is wide, the high mast range, 240 products, covers ports, rail yards, container terminals and sports grounds.
Where the atmosphere is classified, the ATEX explosion-proof range, 101 products, covers linear, high bay, flood, streetlight and exit fittings certified for Zone 1 and Zone 2 gas and Zone 21 and Zone 22 dust areas. Roads and access routes across the site come from the streetlight range.
Specifications are published per product across the catalogue — power, lumens, efficacy in lm/W, IP rating, beam angle, CCT, IK rating, voltage and warranty, where these are published for the line — so the engineer can check a fitting against the specification before enquiring.
What an industrial site asks of the fitting
Six things shape how we specify lighting for a plant, a warehouse or a yard.
Where these fittings go
Specification summary
Custom optics, custom builds and OEM work
JNLED was founded in 2010 and is headquartered in Hong Kong, close to the factories in South China we work with, which allows close collaboration on product development. We hold our own moulds on key product lines and buy direct from the chip, driver and coating suppliers.
That is what makes customisation practical on a project order rather than a catalogue-only exercise. We take on OEM projects and a high level of customisation. If the job needs a wattage, an optic, a mounting or a build the catalogue does not already list, send us the requirement and we will tell you what we can do against it.
Simulation, costing and delivery support
Before you commit, we produce light-simulation reports for the space in question and cost-saving calculations against the existing installation. That gives the specifier something to present and the operator a figure to judge it by.
After the order, we cover project design, production, logistics including customs clearance and warehousing, and installation support, and we ship worldwide. Warranty is published per product, where it is stated for the line.
Send us the site
Give us the hall or the area, the mounting height and the lux target, and we come back with a specification, a simulation and a price. A layout drawing speeds this up, but it is not required to start.

















